|
• The POOLGUARD MODEL PGRM-2
introduces "Negative Displacement Technology", a new
sensing method that requires no adjustment.
•
The POOL ALARM is activated with an on/off key, remove
the key to turn the alarm on. Once POOLGUARD is activated
the alarm will sound if the unit is removed from the pool.
•
The POOL ALARM is activated with an on/off key, remove
the key to turn the alarm on. Once Poolguard is activated the
alarm will sound if the unit is removed from the pool — this
feature lets the pool owner know if someone is removing the
alarm without their permission.
•
The alarm will sound at the pool and in the home via a remote
receiver at the same time.
•
The POOL ALARM automatically resets after 5 minutes of
alarming.
•
The POOLGUARD SYSTEM can be used in a pool up to 800
square feet in area.
•
The POOL ALARM has a complete functional test feature
every time it is installed in the pool.
|
•
The REMOTE RECEIVER comes with a 9-volt power supply and
can be plugged into any 110-volt
outlet in the house. The POOL ALARM sets stationary on
the side of the pool deck and must be removed while swimming.
•
The range of the REMOTE RECEIVER is up to 200 feet from
the POOL ALARM.
•
The POOL ALARM requires NO ropes, wires, tie downs
or deck anchors. The POOL ALARM is user friendly and
completely portable.
•
The POOL ALARM can be used with a solar blanket.
•
POOLGUARD maintains a full customer service department
for the customer's convenience: Call 1-800-242-7163.
•
The POOL ALARM uses one 9-volt battery, and has an
audible low battery indicator; battery life is approximately one
year.
•
POOLGUARD has a three-year warranty and repair.
. |
